FAQ


FAQ
Frequently Asked Questions
- Orders and Shipping
- Bluetooth & Pairing
- General
- Compatibility
- Audio-Based Haptics
Pairing and Setup
No worries! The TactSuit works with any standard Bluetooth adapter that supports Bluetooth 4.0 or above. If you no longer have the included Bluetooth dongle, you can use another one that meets these requirements.
The TactSuit works with Windows Mixed Reality headsets. In normal circumstances and environments, such as a show room, office, and home environments, you will have no issues using your WMR controllers and TactSuit together. However, you may experience interference when using them together in a crowded environment, such as exhibitions and trade shows, where there are lots of strong Wi-Fi signals.
Bluetooth connection between bHaptics devices and consoles is currently not supported. For audio-based haptic feedback via a wired connection, please follow the instructions in the article linked below: How to connect the TactSuit X with your console via an audio cable.
Download and open bHaptics Player app on your phone. Download bHaptics Player: Press the power button to turn on your bHaptics device. Tap to scan TactSuit device(s) in pairing mode. Tap Pair next to each scanned device to pair one device at a time. Or tap Pair All to pair all scanned devices.
Press the power button to turn on your bHaptics device(s). Navigate to Settings on your Quest headset. Select Settings > Devices > Bluetooth on your Quest headset. Find Bluetooth Pairing > Add a new device and pair your TactSuit. D ownload bHaptics Player on your Quest headset. Open bHaptics Player and check your bHaptics device(s) on the Paired Device panel. Launch a natively supported Quest title. Enable Haptics/bHaptics in the game settings and enjoy optimized haptic feedback! Note: Some apps might require you to enable Nearby Device permission in the app settings. Download bHaptics Player for bHaptics device management, feedback intensity settings and more!
We provide a Bluetooth dongle with every TactSuit device. Insert the provided dongle to a USB port of your PC to enable Bluetooth, then pair your TactSuit on bHaptics Player. Note: Due to Windows protocols, you can connect up to 5 Bluetooth devices at a time.
Download bHaptics Player from the Downloads page. Open the bHaptics Player on your PC. Insert the provided Bluetooth dongle into your PC. Press the power button to turn on your bHaptics device . Right-click on the device icon in the Quick Control Panel at the bottom left corner and select “Pair” to connect. For a smooth setup experience, follow the step-by-step instructions available within the bHaptics Player. Simply tap the (?) icon in the top menu and go to “Bluetooth Troubleshooting.” We recommend following these instructions, especially if you’re new to the setup process.